3FT Spiral RGB Led Whip Light w/ RGB Chasing/Dancing Light RF Remote Control Lighted Antenna Whips for Can-am ATV UTV RZR Polaris Dune Buggy 4 Wheeler Offroad Jeep Truck
Designed to add more stylish cool patterns for fun in the sand trail and upgraded in premium built to last. Resolve your worry of tube breaking, connection error, remote interference as well as draining battery issue. Reliable option for your choice! Widely use on Can-am ATV UTV RZR Polaris Dune Buggy Sand Rail Go Kart 4 Wheeler Offroad Jeep Truck etc.
Specifications:
Tube Size: 3ft from tube to base
Wire Length: 8.6 Feet
LED Type: 5050 RGB
LED Lumen: 20-22LM
Lighting Patterns: 366 dancing patterns(chasing, build-up, strobe, pulse, scan, stack and more), 12 solid colors.
Material: Flexible Polycarbonate tube, 180° bendable
Base: Quick connect and release aluminum spring base
Operating Voltage: 12V DC
Operating Temperature: -20℃ to 45℃
Waterproof rate: IP67
Lifespan: Over 50,000 Hours
【Cool Design with 200% Brightness】: Spiral design to glow in 360°direction, light up the night with hundreds of dancing patterns like chase, build-up, strobe, pulse, scan, stack etc and 12 solid colors. 200% Super brighter, Always ensure stand out in the ride, and safe in the night trail without being left out
【Premium Built To Last】: Using flexible Polycarbonate tube, add proper flexibility for to prevent break or snapping at the base but will not overbounce to hit your cab. The quick-connect/disconnect base is upgraded to a fix one to lock the whip light to prevent it spinning around. The 3 Pin plug-and-play connector is upgraded in premium built and all hardware are upgraded in stainless steel. IP67 waterproof, sandproof, and shockproof. Durable to last
【One-to-one Remote Control】: You can freely set into/remove one-to-one remote control mode. Hassle from others' remote control interference if you don’t like, and can easily pair with others when you remove the one-to-one remote control mode. (Note: See guidelines & tips on the user manual)
【Better Battery Protection】: Provide whip light rocker switch for your use. You can connect whip light to rocker switch first instead to battery directly, avoid draining battery. (Note：See guidelines of rocker switch connection on the user manual)
【Simple Installation】: Just quick release the base, mount it on a 12mm hole, and then quick connect the base with whip light. For wiring, just plug and play the whip lights with the 2 way splitter, and then connect it to rocker switch and battery. You may need extra wire in this part. (See guidelines of rocker switch connection on the user manual)
